Project Case Study Rubber Ink for Gilbert Rugby Ball
This project required an ink, which sticks to
the rubber surface and should
Project Case Study Encapsulation Ink for Acrylics
This project required an ink for prints that
are to be encapsulated in poly methyl methacrylate.
Project Case Study 2in1 Ink for Untreated PP
The revolutionary 601-type screen printing ink is developed for untreated Poly propylene materials. No priming necessary with this 2in1 system. It provides excellent adhesion and flexibility, alcohol and gasoline resistance.
Application scope: Untreated PP materials that normally require a priming or corona treatment.
The 601-ink is made of high quality resins and additives. It dries by solvent evaporation and chemical reaction to give a print with excellent adhesion.
Project Case Study Allergy sensory Indicator
This project required an allergy indicator in the form of a temporary transfer to test individuals who may be allergic to hair dyes ingredients.
Therefore a multilayer ink system was developed, which incorporates in one layer the sensitising active; the other layer functions as a membrane, controlling the release of the active.
In theory, any active can be incorporated into
an ink formulation and
Project Case Study Ink for Nylon Life Jackets
This project required an ink to be printed on inflatable Nylon Life Jackets for the airline industry.
The 018-ink dries by solvent evaporation and chemical reaction to give a print that resists extreme weather conditions. In addition the print should show no signs of cracking, once CO2 cartridges are activated to fill the gas into the chambers of the jacket.
The 018-ink is printed on 70% of globally all inflatable Life Jackets within the airline industry.
Project Case Study FDA-approved
This project required an ink to be printed on Epidural Catheters to leave a scale behind. This ink is applied via Letter-press technology.
A specific Nylon ink was developed and was finally FDA approved to be used inside the Human body. The ink diffuses completely into the Nylon material, which is finally encapsulated.
Nearly 1.5m Epidural Catheters are printed annually with the 603-type letter press ink.
Project Case Study Ink
for the frame of
This project required an ink to be printed on UK traffic lights and should last the severe outdoor conditions.
An ink system was developed for untreated Poly propylene materials.
The solvent based ink demonstrates excellent adhesion and resistance and drying time can be easily tuned with our thinner systems.
This ink is applied on the frame of all UK traffic lights.